Panel Card does not boot although setreset ist set

Although I've set the setreset variable according to http://www.armbedded.eu/node/64 in U-Boot, my Panelcard boots only after I have disconnected the battery shortly.
I even tried to prolong the external boot time to 0x0f (i.e. 2 seconds) by setting AT91C_RSTC_MR (fffffd08) to a5000f01 (instead of a5000a01 which means 31,25ms) -- no success.

U-Boot's Environment:

U-Boot> printenv                                                                
bootdelay=3                                                                     
baudrate=115200                                                                 
flash_type=N_type                                                               
lcd=EDT                                                                         
insize=300000                                                                   
kerneladdr=10060000                                                             
32M=mw ffffea08 85227275;setenv inaddr 21400000                                 
64M=mw ffffea08 85227279;setenv inaddr 23400000                                 
copyrootfs=cp.b 10200000 $(inaddr) $(insize);setenv initrd initrd=0x$(inaddr),0x
$(insize)                                                                       
setbootargs=setenv bootargs $(basicargs) $(mtdparts) $(initrd)                  
setbasicargs=setenv basicargs console=ttyS0,115200 mem=$(ramsize) root=/dev/ram 
rw                                                                              
mtdparts=mtdparts=physmap-flash.0:384k(boot),1664k(linux),3072k(initrd),10240k(c
fg),-(custom)                                                                   
ramsize=32M                                                                     
bootcmd=run setreset;run flashboot                                              
inaddr=21400000                                                                 
initrd=initrd=0x21400000,0x300000                                               
basicargs=console=ttyS0,115200 mem=32M root=/dev/ram rw                         
bootargs=console=ttyS0,115200 mem=32M root=/dev/ram rw mtdparts=physmap-flash.0:
384k(boot),1664k(linux),3072k(initrd),10240k(cfg),-(custom) initrd=0x21400000,0x
300000                                                                          
flashboot=run $(ramsize);run copyrootfs;run setbasicargs;run setbootargs;bootm $
(kerneladdr)                                                                    
ethaddr=00:50:C2:3A:B6:F2                                                       
setreset=mw fffffd08 a5000f01                                                   
stdin=serial                                                                    
stdout=serial                                                                   
stderr=serial

Re: Panel Card does not boot although setreset ist set

p.s. it won't boot at all, not even after the 16s watchdog period has elapsed

Syndicate content