Stamp Adaptor 2

Technical Reference

All rights to this documentation and to the product(s) described herein are reserved by taskit GmbH.

This document was written with care, but errors cannot be excluded. Neither the company named above nor the seller assumes legal liability for mistakes, resulting operational errors or the consequences thereof. Trademarks, company names and product names may be protected by law. This document may not be reproduced, edited, copied or distributed in part or in whole without written permission.

This document was generated on 2014-07-09T15:28:05+02:00.

Table of Contents

1. Stamp Adaptor 2

1. Description
2. Connector Pin Assignments
3. Stamp Adaptor 2 Dimensions
4. Stamp Adaptor 2 Schematics

List of Figures

1.1. Stamp Adaptor 2 Dimensions
1.2. Stamp Adaptor 2 Bus Interface
1.3. Stamp Adaptor 2 Wrapfield
1.4. Stamp Adaptor 2 Ethernet

List of Tables

1.1. Pin Assignment and Multiplexing X21
1.2. Pin Assignment and Multiplexing X22

1. Stamp Adaptor 2

Table of Contents

1. Description
2. Connector Pin Assignments
3. Stamp Adaptor 2 Dimensions
4. Stamp Adaptor 2 Schematics

1. Description

The Stamp Adaptor 2 functions as interface board between Stamp9G20 and Panel-Card EVB. It may also be used for prototyping without the EVB. It has the connectors for Panel-Card EVB (X21, X22), a wrapfield for direct access to all pins of Stamp9G20 (X11, X12) and connectors for connecting the Stamp9G20. Additionally it implemts a Davicom® DM9161BIEP ethernet physical interface design, which may be used for customer designs as well.

2. Connector Pin Assignments

The pin assignments for the wrapfield are identical with the pins of Stamp9G20. The pin assignment for X21/X22 are below:

1	VCC			DSR0	ISI D2	PB22	2
3	PB25	ISI D5	RI0	RXD0		PB5	4
5	PB4		TXD0	DTR0	ISI D4	PB24	6
7	PB26	ISI D6	RTS0	CTS0	ISI D7	PB27	8
9	PB23	ISI D3	DCD0	GND			10
11	PB14		DRXD	DTXD		PB15	12
13	PA7		MCCDA	MCCK		PA8	14
15	PA6		MCDA0	MCDA1		PA9	16
17	PA10	ETX2	MCDA2	MCDA3	ETX3	PA11	18
19	VCC			GND			20
21	USB Host A-			USB Host B-			22
23	USB Host A+			USB Host B+			24
25	USB Device-			USB Device+			26
27	PA22	ETXER	ADTRG	/RESET			28
29	VCC			GND			30
31	PB17	TCLK4	TF0	RF0	ISI D1	PB21	32
33	PB16	TCLK3	TK0	RK0	ISI D0	PB20	34
35	PB18	TIOB4	TD0	RD0	TIOB5	PB19	36
37	BMS			WKUP			38
39	SHDN			VBATT			40

Table 1.1. Pin Assignment and Multiplexing X21

1	VCC			SCK2	RXD4	PA30	2
3	PA31	TXD4	SCK0	RXD2		PB9	4
5	PB8		TXD2	TXD1	TCLK1	PB6	6
7	PA4	MCDB2	RTS2	CTS2	MCDB1	PA5	8
9	PB7	TCLK2	RXD1	GND			10
11	PA23	ETX2	TWD	TWCK	ETX3	PA24	12
13	VCC			GND			14
15	PB0	TIOA3	SPI1MISO	SPI1MOSI	TIOB3	PB1	16
17	PB2	TIOA4	SPI1CLK	SPI1CS1	TIOA5	PB3	18
19	PA0	MCDB0	SPI1CS2		SPI1CS3	PC3	20
21							22
23							24
25							26
27	VCC			GND			28
29	TDI			TMS			30
31	TDO			TCK			32
33	ELED_L			ELED_S			34
35	ETX+			ETX-			36
37	ERX+			ERX-			38
39	POE1			POE2			40

Table 1.2. Pin Assignment and Multiplexing X22

3. Stamp Adaptor 2 Dimensions

Figure 1.1. Stamp Adaptor 2 Dimensions

4. Stamp Adaptor 2 Schematics

Figure 1.2. Stamp Adaptor 2 Bus Interface

Figure 1.3. Stamp Adaptor 2 Wrapfield

Figure 1.4. Stamp Adaptor 2 Ethernet

armbedded.eu