3. Setting up the Hardware

Starterkit Contents

Figure 3.1. Starterkit Contents

Stamp Adaptor 2 (2) and Stamp9G20 (1) and EVB are already delivered mounted.

  • Connect the serial adapter cable to X25 Debug (4).

  • Connect the nullmodem cable with the serial adapter cable and a serial port of your PC.

  • Connect an ethernetcable with the ethernet X3 (5).

  • Connect the power supply unit with DC/IN X12 (3).

This concludes the hardware setup. Before you turn on the Stamp9G20 for the first time, start a terminal emulation program on the connected computer as described in the next chapter.