22. USB Device Port (UDP)

The Panel-Card integrates one USB device port supporting speeds up to 12 MBit/s.

The USB Device Port (UDP) is compliant with the Universal Serial Bus (USB) V2.0 full-speed device specification. The USB device port enables the product to act as a device to other host controllers.

The USB device port can also be implemented to power on the board. One I/O line may be used by the application to check that VBUS is still available from the host. Self-powered devices may use this entry to be notified that the host has been powered off. In this case, the pullup on DP must be disabled in order to prevent feeding current to the host. The application should disconnect the transceiver, then remove the pullup.